Study on multiple induced polarization parameters in groundwater exploration in Bashang poverty alleviation area of Heibei Province,China

The study examines a water exploration and poverty alleviation project in Guyuan county. The study analyzes correlations between aquifers and multiple induced polarization (IP) parameters, including resistivity, polarizability, deviation, half decay time, water-bearing factors, and Kc, a new parameter refined in this study. Based on the study, the well was placed accurately, and its maximum water inflow reached 30 m³/h. Kc value highlights the rate of change at early stages of IP secondary field. Kc value served as a quick indicator in this groundwater prospecting and is validated in practice. Progress has been made in finding new parameters in exploring water with IP method. Thanks to the project, local people have access to water and poverty alleviation has scored some achievements.     

大地水准面高的计算及其在海底地形反演中的应用

为充分挖掘海洋重力数据在反演海底地形中的应用潜力,尝试探索利用大地水准面高反演海底地形的技术途径,并以夏威夷—皇帝海山链拐点所在海区作为反演试验区进行验证。首先采用Belikov列推法计算伴随(缔和)勒让德函数,利用EIGEN-6C4地球重力场模型解算获取了分辨率为1'的大地水准面高格网数值模型;然后通过综合分析反演比例函数和转换函数特点、研究海区大地水准面高与海底地形的相干特性以及大地水准面高本身尺度特征,获得了利用大地水准面高反演海底地形的频段范围;最终以试验海区大地水准面高为数据输入,构建了相应的海底地形模型(BNT模型),并与ETOPO1等海深模型进行比对分析。试验结果表明:BNT模型检核差值在一倍均方差范围检核点数量占比70.60%,相比正态分布更加集中;BNT模型检核精度低于ETOPO1等海深模型;海深模型检核精度随着水深增加不断提升,水深小于1 000 m时,海深模型相对误差出现较大发散现象;计算海域ETOPO1模型精度最高,GEBCO模型和DTU10模型检核精度相当。     

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

高分六号遥感卫星新增波段下的树种分类精度分析

高分六号卫星具有覆盖广、多种分辨率、波段多的优势,能为遥感解译提供更丰富的信息。为探究高分六号卫星新增波段在森林树种识别上的应用,本文以覆盖根河市阿龙山林业局的一期高分六号宽幅影像为数据源,基于特征优化空间算法（Feature Space Optimization,FSO）和最大似然分类法,分别利用高分六号的前4个波段和所有波段（8波段）的光谱、纹理等特征进行了森林树种分类,并逐一添加新增波段特征确定了各波段的贡献率排名。结果表明：在加入了优选出的均匀性纹理、均值纹理和角二阶矩纹理3种纹理特征后,前4波段和8波段的分类精度比只基于光谱特征时的精度分别高出13.23%和24.63%;利用8波段信息比只利用前4波段在基于光谱特征上的精度高11.88%,在基于光谱+纹理特征上则高23.24%;基于8波段光谱+纹理特征的树种分类精度最高,达到68.74%,新增4波段的贡献率排名为B6>B5>B8>B7,说明新增红边波段对于本次树种分类试验的贡献率最高,能为北方树种识别提供有效帮助。     

捷联式航空重力扰动矢量解算及误差补偿

介绍捷联式航空重力矢量测量的基本原理，利用波数相关滤波（WCF）、比力线性校正的方法对重力扰动的水平和垂向分量进行误差补偿，评定内符合精度。对国产捷联式航空重力矢量仪的某次试验数据进行处理，以验证和评估航空重力矢量仪的性能。结果表明，在半波长分辨率为7.5 km时，6条重复测线的重力扰动水平分量经波数相关滤波处理后，东、北向分量的平均内符合精度分别从9.77 mGal、9.18 mGal提高到5.95 mGal、3.83 mGal；对比力的垂向分量线性校正后，将解算的重力扰动垂向分量再用WCF方法处理，其平均内符合精度从1.27 mGal提高到0.59 mGal。     

Wetland hydroperiod classification in the western prairies using multitemporal synthetic aperture radar

Wetlands represent one of the world's most biodiverse and threatened ecosystem types and were diminished globally by about two‐thirds in the 20th century. There is continuing decline in wetland quantity and function due to infilling and other human activities. In addition, with climate change, warmer temperatures and changes in precipitation and evapotranspiration are reducing wetland surface and groundwater supplies, further altering wetland hydrology and vegetation. There is a need to automate inventory and monitoring of wetlands, and as a study system, we investigated the Shepard Slough wetlands complex, which includes numerous wetlands in urban, suburban, and agricultural zones in the prairie pothole region of southern Alberta, Canada. Here, wetlands are generally confined to depressions in the undulating terrain, challenging wetlands inventory and monitoring. This study applied threshold and frequency analysis routines for high‐resolution, single‐polarization (HH) RADARSAT‐2, synthetic aperture radar mapping. This enabled a growing season surface water extent hyroperiod‐based wetland classification, which can support water and wetland resource monitoring. This 3‐year study demonstrated synthetic aperture radar‐derived multitemporal open‐water masks provided an effective index of wetland permanence class, with overall accuracies of 89% to 95% compared with optical validation data, and RMSE between 0.2 and 0.7 m between model and field validation data. This allowed for characterizing the distribution and dynamics of 4 marsh wetlands hydroperiod classes, temporary, seasonal, semipermanent, and permanent, and mapping of the sequential vegetation bands that included emergent, obligate wetland, facultative wetland, and upland plant communities. Hydroperiod variation and surface water extent were found to be influenced by short‐term rainfall events in both wet and dry years. Seasonal hydroperiods in wetlands were particularly variable if there was a decrease in the temporary or semipermanent hydroperiod classes. In years with extreme rain events, the temporary wetlands especially increased relative to longer lasting wetlands (84% in 2015 with significant rainfall events, compared with 42% otherwise).     

基于平均分组和叠加相关的GPS信号捕获方法

针对目前GPS软件接收机C/A码捕获信噪比门限高、捕获速度慢的问题，提出一种基于平均分组和叠加相关的GPS弱信号捕获方法。首先，基于平均相关处理技术降低C/A码捕获过程中的自相关损耗，提高对微弱信号的捕获能力；然后，利用叠加相关提高相干运算的运算效率，并采用线性插值提高自相关函数性能；最后，利用频偏校正和内插进一步提高C/A信号的捕获精度。理论分析和仿真实验均验证，该方法能够在较低的信噪比下实现GPS信号捕获，且精度较高、运算量较低。     

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.     

高分三号SAR影像双阈值变化检测

双阈值合成孔径雷达SAR(Synthetic Aperture Radar)变化检测算法具有在发现变化区域的同时还能确定地表发生后向散射变化类型的优点。针对广义高斯双阈值最小误差法D-GKIT(Dual Generalized Kittler and Illingworth Thresholding)在进行阈值选取时直方图中不同类别像素灰度级重叠严重时,分割结果容易在尖峰单侧选取出双阈值而导致无法正确分割差异图的问题,本文提出一种结合归一化最大类间方差和广义高斯最小误差法GKIT(Generalized Kittler and Illingworth Thresholding)的双阈值SAR变化检测方法。首先,提出以归一化最大类间方差值作为灰度级重叠程度的判别参数,确定阈值的选取顺序及两个候选区间;然后,利用GKIT在候选区间内进行分割,获取单侧阈值及非变化类拟合函数;最后,提出利用非变化类拟合函数更新后的直方图作为另一侧阈值选取基础进行分割,得到对应分割阈值。以宁波地区高分三号(GF-3)SAR卫星影像作为试验研究数据,结果表明:本文方法能较好地解决灰度级重叠时D-GKIT无法进行正确分割的问题,具有良好的变化检测效果和更强的鲁棒性且达到了利用研究区数据验证利用GF-3号SAR卫星影像进行变化检测研究可行性的目的。